| After-sales Service: | Free Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Certification: | TUV, ISO, RoHS, CE |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Features:
1. Equipped with National III emission engine, adopts integrated electronic control high pressure common rail, supercharged inter-cooling, single cylinder four valves, dual power, strong power, and average overhaul period ≥ 15000 hours.
2. Standard German high-quality transmission technology ZF gearbox, electronic shifting, high transmission efficiency, low fuel consumption, low noise, an average of 10,000 hours without opening the box.
3. The balance box is equipped with a heavy-duty roller chain as standard, and the tensile strength is 1.4 times higher than the standard. The bearing adopts splash lubrication, which is reliable in lubrication. The bearing is maintenance-free and prolongs its service life.
4. Standard roller working device and reinforced worm gear box, flexible rotation, high precision, dustproof, adjustment-free, and high strength.
| Engine | DCEC 6BTAA5.9-C180 | |
| Rated Power | (kW) | 125(170)@2200 |
| Blade Width | mm(inches) | 3960(156) |
| Maximum Speed | km/h (mph) | 38 (23.6) |
| Draw Bar Pull | (kN) | 81.6 |
| Operating Weight | kg(Lb) | 15000 |
| ENGINE | ||
| Tier | II | |
| Gross Power | kW(Hp)@rpm | 125(170)@2200 |
| Net Power | kW(Hp)@rpm | 113(151)@2200 |
| Peak Torque | 750N.m/1300rpm | |
| Torque Rise % | 30% | |
| Number of Cylinders | 6 | |
| Aspiration | turbo air-to-air aftercooled | |
| TRANSMISSION | ||
| Transmission Type | power shift | |
| Transmission Configuration | 6f/3r | |
| Torque Converter | three-member single turbine | |
| Maximum Travel Speed, fwd | (km/h) | 38 |
| Maximum Travel Speed, rev | (km/h) | 24.7 |
| Number of Speeds, fwd | 6 | |
| Number of Speeds, rev | 3 | |
| AXLES | ||
| Front Axle Make | Weld axle | |
| Rear Axle Make | Meritor | |
| Differential Type | NO-SPIN limited slip standard | |
| Final Drive Type | chain drive | |
| Axle Oscillation | ±15° | |
| Front Axle Type | all welded steel frame | |
| Front Axle, Wheel Lean Angle | ±17° | |
| STEERING | ||
| Steering Configuration | load sensor steering gear | |
| Steering Relief Pressure | (Mpa) | 17 |
| Minimum Turning Radius | (inches) | 7800(307) |
| Steering Angle | ±45° | |
| Frame Articulation Angle | ±20° | |
| BRAKES | ||
| Service Brake Type | (Dry )shoe | |
| Service Brake Location | ear axle only | |
| Service Brake Actuation | hydraumatic | |
| TIRES | ||
| Tire Size | 17.5-25 PR12/L3 | |
| HYDRAULIC SYSTEM | ||
| Main Pump Type | gear | |
| Main Relief Pressure | (Mpa) | 18 |
| Pilot Pump Flow | L(Gal)/min | 126(33) |
| WORKING CAPACITIES | ||
| Maximum Draw Pull | (kN) | 81.6 |
| Cutting Pressure | kg(Lb) | 6800(14991) |
| TANDEM DRIVE PERFORMANCE | ||
| Height | mm(inches) | 600(24) |
| Width | mm(inches) | 210(8) |
| Thickness, inner wall / outer wall | mm(inches) | 20/20(0.8/(0.8) |
| Center Distance | mm(inches) | 1538(61) |
| Oscillating Angle | ±15° | |
| MOLDBOARD PERFORMANCE | ||
| Bank Cut Angle | 40~70 | |
| Moldboard Lift Above Ground | mm(inches) | 450(18) |
| Moldboard Side Shift, right / left | mm(inches) | 725/675(29/27) |
| Maximum Sloping Angle | 90° | |
| Cutting Depth | mm(inches) | 555(22) |
| Circle Rotation | 360° | |
| Circle Diameter | mm(inches) | 1455(57) |
| Circle Thickness | mm(inches) | 135(5) |
| DIMENSIONS | ||
| Wheelbase | mm(inches) | 6230(245) |
| Overall Length | mm(inches) | 8790(346) |
| Overall Height with Cab | 3438(135) | |
| Overall Width | mm(inches) | 2600(102) |
| Clearance under Front Axle | mm(inches) | 645(25) |
| Moldboard Standard Length | mm(inches) | 3960(156) |
| Moldboard Standard Thickness | mm(inches) | 19(0.7) |
| Moldboard Standard Height | mm(inches) | 610(24) |
| OPERATING WEIGHTS | ||
| Operating Weight | kg(Lb) | 13900(30644) |
| On Front Wheels | kg(Lb) | 3960(8730) |
| On Rear Wheels | kg(Lb) | 9940(21914) |
| SERVICE CAPACITIES | ||
| Fuel Tank | L(Gal) | 230(61) |
| Engine Oil | L(Gal) | 22(6) |
| Cooling System | L(Gal) | 40(11) |
| Hydraulic Reservoir | L(Gal) | 186(49) |
| Transmission And Torque Converter | L(Gal) | 45(12) |
| Tandems, Each | L(Gal) | 28(7) |
){kind=link}