2 Ton Forklift Cpcd20 Truck with 4500mm Mast Triplex with Free Lift

• After-sales Service: Provided
• Warranty: Provided
• Cab Location: Adjustable
• Model NO.: Cpcd20
• Type: Diesel Forklift
• Power: Diesel Engine
• Load Capacity: 1T - 5T
• Fuel: Diesel
• Load center: 500mm
• Lift height: 3000~5000mm
• Condition: New
• Fork Length: 1070mm
• Fork Width: 125mm
• Min. Ground Clearance: 115mm
• Traction Coupling Height: 290mm
• Wheel Base: 1650mm
• Max. Traveing Speeds (Laden/Unladen): 18/18km/H
• Engine Rated Output: 36.8/2500kw/Rpm
• Engine Rated Torque: 165/1500-1800nm/Rpm
• Engine Displacement: 2.67L
• Free Lift: 150mm
• Transport Package: Free
• Specification: 3460*1150*2070mm
• Trademark: Famous Brand
• Origin: China
• HS Code: 8427209000
• Production Capacity: 500sets/Month

Product Description

Products Description

                           
               2 Ton Forklift Cpcd20 Truck with 4500mm Mast Triplex with Free Lift

INTRODUCTION
This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.

FEATURES
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High-efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device is used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving, increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.

Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure safety.
- Parking brake with a safety protection device, when the parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material from falling down in case of hose broken.
- High-pressure hose is designed far away from the driver.
- Safety wire harness, using a waterproof plug.

Product Parameters
 

CPCD20 Technology Specification
Specification	1	Model				CPCD20
	2	Operator type				Diesel
	3	Load capacity			Kg	2000
	4	Load center			mm	500
Dimensions	5	Max.lifing height			mm	3000
	6	Free lift			mm	120
	7	Fork size		L×W×T	mm	1070×120×40
	8	Tilt angle		front/rear	deg	6\12
	9	Front overhang			mm	476
	10	Rear overhang			mm	485
	11	Size	Overall length(without fork)		mm	2610
	12		Overall width		mm	1150
	13		Mast height(fork lowering)		mm	1995
	14		Mast height(fork raised)		mm	4200
	15		Height of head guard		mm	2130
	16	Turning raduis			mm	2170
	17	width of minimum intersecting aisle			mm	2680
Performance	18	Speed	Travelling (no load)		Km/h	20
	19		Lifting (full load)		mm/sec	450
	20		Lowering (full load)		mm/sec	450
	21	Max.drawbar pull			N	17500
	22	Max.gradeabillty			%	20
Chassis	23	Tires		front	mm	7.00-12-12PR
	24			rear	mm	6.00-9-10PR
	25	Track		front	mm	970
	26			rear	mm	970
	27	wheelbase			mm	1600
	28	Ground clearence	At lowest point(mast)			120
	29		Framer			145
Weights	30	Self weight			Kg	3580
	31	weight distribution	Full load	front		4856
	32			rear		724
	33		No load	front		1428
	34			rear		2142
Drive	35	Battery	Voltage / capacity		V/AH	12/80
	36	Engine	Model			4D27G31
	37		Origin			CHINA
	38		Rated power		kw/rpm	36.8/2650
	39		Rated torque		N.m/rpm	156/1500
	40		Numberof cylinder			4
	41		Bore and Stroke		mm	90×105
	42		Displacement		L	2670
	43		Fule tank capacity		L	60
	44	Transmission	Origin			CHINA
	45		Type			Powershift (Manual)
	46		Gear	Speed forward/Backward		1/1(2/2)
	47	Operatiing pressure			Mpa	17.5

Details Images


Company Profile

 
                                       Richmchn Machinery Engineering (Shanghai) Co., Ltd.

Richmchn Machinery Engineering (Shanghai) Co., Ltd. is an engineering & construction machinery provider in Shanghai, especially for construction machinery, heavy industrial equipment and vehicle. We had exported famous international brand around the world. With over 10 years experiences in the field of engineering industry and accompanying to fulfill strictly industrial standard, RICHMCHN had established and have been consistently keeping long term business relationship with many general contractors, civil engineering firms and construction companies throughout the world.

We participated as package equipment provider previously include rural and municipal road projects in Southeast Asia, civil projects in Middle East, airport projects in Africa, dredging projects in South America, building projects in Oceania, and we are still achieving more and more projects at present. We are always committed to offer our customers quality products with reliable performance, competitive price and comprehensive services, to ensure every engineering project to be run smoothly and on schedule.

To provide reliable products with quick delivery time, to make prompt reaction for spare parts and after-sales services, to visit the users field regularly for local training and maintenance, RICHMCHN has been often praised by our customers and has taken great reputation as a trustworthy inproject partner.

RICHMCHN believe in combining our own achievement together with our customer benefits. Open communication, effective planning and elaborative preparation always commit us to execute and deliver our promises for our customers all over the world.